Author Topic: Skeeball arcade repair help NEEDED :)  (Read 17951 times)

Offline muchable

  • Newbie
  • *
  • Posts: 1
Skeeball arcade repair help NEEDED :)
« on: July 15, 2009, 06:09:51 pm »
I recently purchased a skeeball machine and the fires up and the computer appears to be working properly. When i start up a game by inserting a coin, the jingle plays, the score resets to 000 but the ball release solenoid does not trigger. I need someone who is familiar with arcade games and electrical to help me fix this issue.

Will pay modest rates and provide beer.

Thanks!

joey

Offline harley

  • Newbie
  • *
  • Posts: 4
Re: Skeeball arcade repair help NEEDED :)
« Reply #1 on: August 23, 2009, 06:58:37 am »
HI,  Ive had this problem with pinball machines,  everything would work but the ball would not come up.   check with a volt meter and make sure your getting power to your selenoid,   99% of the time on the pinballs I work on its the selenoid thats bad, you might want to try replacing your   selenoid that holds the balls...   

Offline DynamiteSJ

  • Newbie
  • *
  • Posts: 11
Re: Skeeball arcade repair help NEEDED :)
« Reply #2 on: February 10, 2010, 10:46:05 pm »
most likely its the solinoid.... i dont know which one it uses... pull it out and try to match part numbers